IMPIEGO DI APPARECCHIATURE NUMERICHE PER LA VERIFICA DI TRASFORMATORI DI TENSIONE. = UTILISATION DES APPAREILS NUMERIQUES POUR L'ESSAI DES TRANSFORMATEURS DE TENSIOND'APUZZO M; LANGELLA A.1977; ELETTROTECNICA; ITAL.; DA. 1977; VOL. 64; NO 3; PP. 239-244; BIBL. 9 REF.Article

Optimization of robotic arms made of composite materials for maximum fundamental frequencyCAPRINO, G; LANGELLA, A.Composite structures. 1995, Vol 31, Num 1, pp 1-8, issn 0263-8223Article

Study of a three-point bending specimen for shear characterisation of sandwich coresCAPRINO, G; LANGELLA, A.Journal of composite materials. 2000, Vol 34, Num 9, pp 791-814, issn 0021-9983Article

Zeolitized tuffs in pedotechnique for the reclamation of abandoned quarries. A case study in the Campania region (Italy)BUONDONNO, A; GRILLI, E; CAPRA, G. F et al.Journal of environmental management. 2013, Vol 122, pp 25-30, issn 0301-4797, 6 p.Article

Campanian Ignimbrite as raw material for lightweight aggregatesDE GENNARO, R; CAPPELLETTI, P; CERRI, G et al.Applied clay science. 2007, Vol 37, Num 1-2, pp 115-126, issn 0169-1317, 12 p.Article

Neapolitan Yellow Tuff as raw material for lightweight aggregates in lightweight structural concrete productionDE GENNARO, R; CAPPELLETTI, P; CERRI, G et al.Applied clay science. 2005, Vol 28, Num 1-4, pp 309-319, issn 0169-1317, 11 p.Conference Paper

Modeling pedogenization of zeolitized tuffs. II: medium-term weathering of phlegraean yellow tuff and red tuff with black scoriae by water and humic acidsBUONDONNO, A; COLELLA, A; COLELLA, C et al.Studies in surface science and catalysis. 2007, pp 2092-2097, issn 0167-2991, isbn 978-0-444-53068-4, 2Vol, 6 p.Conference Paper

Prediction of the first failure energy of circular carbon fibre reinforced plastic plates loaded at the centreCAPRINO, G; LANGELLA, A; LOPRESTO, V et al.Composites. Part A, Applied science and manufacturing. 2003, Vol 34, Num 4, pp 349-357, issn 1359-835X, 9 p.Article

Evaluation of phillipsite as cation exchanger in lead removal from waterPANSINI, M; COLELLA, C; CAPUTO, D et al.Microporous materials. 1996, Vol 5, Num 6, pp 337-364, issn 0927-6513Article

Le phillipsiti dei tufi gialli del Napoletano = La phillipsite des tufs jaunes de la région de NaplesDE GENNARO, M; FRANCO, E; LANGELLA, A et al.Periodico di mineralogia. 1982, Vol 51, Num 3, pp 287-310, issn 0369-8963Article

Use of zeolite-rich rocks and waste materials for the production of structural lightweight concretesDE GENNARO, R; LANGELLA, A; D'AMORE, M et al.Applied clay science. 2008, Vol 41, Num 1-2, pp 61-72, issn 0169-1317, 12 p.Article

Zeolitic tuffs as raw materials for lightweight aggregatesDE'GENNARO, R; CAPPELLETTI, P; CERRI, G et al.Applied clay science. 2004, Vol 25, Num 1-2, pp 71-81, issn 0169-1317, 11 p.Article

Elastic behaviour of circular composite plates transversely loaded at the centreCAPRINO, G; LANGELLA, A; LOPRESTO, V et al.Composites. Part A, Applied science and manufacturing. 2002, Vol 33, Num 9, pp 1191-1197, issn 1359-835X, 7 p.Article

Hydrothermal conversion of trachytic glass to zeolite. 3. Monocationic model glassesDE GENNARO, M; LANGELLA, A; CAPPELLETTI, P et al.Clays and clay minerals. 1999, Vol 47, Num 3, pp 348-357, issn 0009-8604Article

A simplified model to predict the tensile and shear stress-strain behaviour of fibreglass/aluminium laminatesIACCARINO, P; LANGELLA, A; CAPRINO, G et al.Composites science and technology. 2007, Vol 67, Num 9, pp 1784-1793, issn 0266-3538, 10 p.Article

Properties of zeolitized tuff/organic matter aggregates relevant for their use in pedotechnique. III organic matter stability and exchange propertiesBUONDONNO, A; COLELLA, A; COLELLA, C et al.Studies in surface science and catalysis. 2007, pp 2141-2146, issn 0167-2991, isbn 978-0-444-53068-4, 2Vol, 6 p.Conference Paper

A torque and thrust prediction model for drilling of composite materialsLANGELLA, A; NELE, L; MAIO, A et al.Composites. Part A, Applied science and manufacturing. 2005, Vol 36, Num 1, pp 83-93, issn 1359-835X, 11 p.Article

Caratteri chimici, fisici e mineralogici delle ceramiche eneolitiche di Piano di Sorrento (Napoli) = Chimic, physic and mineralogic characterization of Chalcolithic ceramics from Piano di Sorrento (Napoli)DE VITO, B; ANNETTA, A; COLELLA, C et al.Revue d'archéométrie. 1996, pp 95-100, issn 0399-1237, SUPConference Paper

A measurement system expert configurator for the optimum assignment of series-parallel connectable devicesLANGELLA, A; BETTA, G; ARPAIA, P et al.Measurement. 1993, Vol 11, Num 2, pp 97-105, issn 0263-2241Article

Le phillipsiti dei tufi gialli del napoletano = La phillipsite des «tufs jaunes napolitains»DE GENNARO, M; FRANCO, E; LANGELLA, A et al.Periodico di mineralogia. 1982, Vol 51, Num 3, pp 287-310, issn 0369-8963Article

New insights into the mineralogical facies distribution of Campanian Ignimbrite, a relevant Italian industrial materialLANGELLA, A; BISH, D. L; CAPPELLETTI, P et al.Applied clay science. 2013, Vol 72, pp 55-73, issn 0169-1317, 19 p.Article

Manufacturing of innovative components formed using SPF processes and filled with aluminum metal foamsASTARITA, A; CARRINO, L; FRANCHITTI, S et al.Surface and interface analysis. 2013, Vol 45, Num 10, pp 1638-1642, issn 0142-2421, 5 p.Conference Paper

An analytical closed-form model to evaluate the peel and shear stresses in middle plane for adhesively bonded composite single-lap jointsLANGELLA, A; CARBONE, R; NELE, L et al.Journal of composite materials. 2012, Vol 46, Num 1, pp 3-17, issn 0021-9983, 15 p.Article

Irreversibly absorbed energy and damage in GFRP laminates impacted at low velocityCAPRINO, G; LOPRESTO, V; LANGELLA, A et al.Composite structures. 2011, Vol 93, Num 11, pp 2853-2860, issn 0263-8223, 8 p.Article

Ceramic replicas of archaeological artefacts in Benevento area (Italy): Petrophysical changes induced by different proportions of clays and temperGRIFA, C; CULTRONE, G; LANGELLA, A et al.Applied clay science. 2009, Vol 46, Num 3, pp 231-240, issn 0169-1317, 10 p.Article